ชื่องานวิจัย ( Article Name )
18
การทดสอบคุณสมบัติแผ่นใยไม้อัดจากกาบกล้วย (Material Qualification Testing of The Fiberboard from Banana Sheaths)
บทคัดย่อ ( Abstract )
This paper proposes a study of agricultural waste for the development of artificial wood planks The objective of this research was to study the basic physicality of wood planking with natural glue and scientific glue. to produce plywood sheets from banana peels. To compare natural glue and commercial glue in this experiment. This experiment was done using by a formula for producing plywood sheets from banana trunks. There are 3 types of glue such as natural glue, latex glue and urea glue. The amount of banana plants was determined in 3 levels: 50, 80, and 100 g. The proportions of each type of glue were 75, 100, and 125 g, and the thickness of samples were 3 mm, 4 mm, and 5 mm. After that, the samples were passed to the sunlight and dried completely. Moreover, the samples were cut and reduced the size of 1.5-inch lengths, and put them in a blender. The samples were calculated by weight ingredients. The samples were mixed until homogeneous and compress them into blocks. The results showed that the physical characteristics of banana plants and banana stems are green color when they are freshy. When dry, the stems will change brown color with shrink and flat. Furthermore, the results obtained that the samples have increased a high fiber and toughness from the difference of thickness and solder ratio. Additionally, the samples found the highest of the wood ratio are the strongest at 100 : 125 grams. Three types of adhesives were tested for durability, such as natural glue, latex
เเอกสารบทความวิจัย ( Paper )
ผู้เขียน ( Authors )
- กานดา คล้ายวรรณะ
- สุริยา สงค์อินทร์
ข้อมูลวารสาร ( Proceeding Infomation )
ข้อมูลการประชุม
วันที่อัพเดตข้อมูลล่าสุด
2024-09-24 08:11:04